Basic Operation
3-15
2
Press [2 sided/Separation]
([2-sided/Split]).
3
Select the desired Split mode.
4
Specify the binding edge of the originals.
5
If you choose [2 sided J 1 sided]
([2-sided J 1-sided]), select the
orientation of the originals.
6
Place the originals in the document processor or on the
platen and press the Start key.
If the original is placed on the platen, Scan next
original(s) will be displayed. Place the next original and
press the Start key.
After scanning all originals, press [Scanning finished]
to start copying.
Ready to copy.
11x8