MSTK
171
MSTK — select Mailbox STacKer
Format
MSTK [tray, tray, ...]; or MSTK 0;
Parameter
tray:
number from 1 to the maximum
Function
The MSTK command is valid only when the option sorter is installed with the printing
system. It instructs the printing system to deliver printed pages in the mailbox mode. In
the mailbox mode, the printed pages are delivered to the trays in the reverse order of tray
parameters. The printed pages are delivered first to the last specified tray until it becomes
full; when the last specified tray becomes full, then the pages are delivered to the second
to the last specified tray, and so on until the first specified tray becomes full. When the
first specified tray becomes full, the bulk tray receives the overflowed pages until it also
becomes full.
When the bulk tray becomes full, the printing system pauses and displays a message
which urges the user to remove paper. By removing all the pages in the bulk tray and
pressing the ON LINE key, printing commences.
If the tray parameters are omitted, all trays excluding the bulk tray are used.
Upon receiving the MSTK command, the printer automatically performs a page feed.
The MSTK 0; command is applicable only for the SO-6. This command cancels the
mailbox mode and delivers all pages in the bulk output tray.
File
!R! RES; MSTK; COPY; EXIT;
PAGE 1 (2 copies, bottom tray) !R! PAGE; EXIT;
PAGE 2 (2 copies, bottom tray) !R! PAGE; EXIT;
To Next Page
Loading...
Need help?
General
