RWER T
249
RWER T — [Read/Write External Resource] set
Terminate string
Format
RWER T[, ’terminator’];
Parameter
terminator:
ASCII text string up to 4 bytes, enclosed in either single or double quotation marks
Function
The RWER T command sets a terminator string for external media whether it is a
memory card or the hard disk. This terminator is used when storing binary data to
external media. See the RWER S command page (page 247) for example. WRED is set
as the default terminator if parameter terminator is omitted.
A command error results and the command has no effect if parameters other than the
above are used.
To Next Page
Loading...
Need help?
General
