Other Features of this Fax
5-45
4
Press the [Program] key.
5
If you do NOT want to designate a time
of day for the operation to begin, press
the [Off] key under Delayed TX and go
directly to step 7.
6
Use the numeric keys to enter the desired time of day for the operation to begin.
NOTE: If you want to change the entered time, use the [] and/or [] keys to move the cursor to
the desired location.
7
Press the [Send] key or the [RX Polling] key to choose the type of transmission.
8
Press the [Next] key.
9
Enter the destination fax number.
NOTE: You can enter the fax number using the numeric keys, abbreviated numbers, one-touch
keys or the address book. Chain dial keys can be used as well.
If you want to enter multiple fax numbers with the numeric keys, press the [Next destinat.] ([Next
dest.]) key after each fax number.
10
Press the [Finish dest. Set] ([Dest. set]) key.
11
Enter a name for the program and the [Next] key. (Maximum 20 characters)
NOTE: In order to enter characters, refer to Entering Characters on page 2-15.)
12
Check the currently registered information and press the key that corresponds to any item that you
want to modify.
13
Press the [OK] key. The message display will return to the same screen as was displayed in step 3.
Dial type
Group
Register the dial.
33600bpsOne-touch
key
Chain
Program
Back
Delayed TX/TX type
Off
08:00.
Off
Delayed TX
Enter using # key.
On
Back
Register the dial.
Program Dial(Send) 0006.
Start Time
Send
RX Polling
TX type
FREE
Program Dial(Send)
Enter Destination.
Register the dial.
book
Address
Abbrev.
Delete SpacePause Subadd.
ABC
ABC
0006.
Dest .1
destinat.
Next
GDE
To Next Page
Loading...
Need help?
General
