8
Use the M and N cursor keys to select “CANCEL” and then
press the Enter key or the Stop/Clear key. The interface
select screen will appear in order for you to select which
interface to cancel the print job for.
Use the M and N cursor keys to select the interface for
which you want to cancel the print job.
* In order to cancel printing of a Status Page or other job
that was initiated from the operation panel on the printer,
select “Current JOB”.
Press the Enter key. Printing will be canceled.
Perform the following procedure when you want to stop printing or you want to clear data.
IMPORTANT!
• Always cancel the print job at your computer first. If the print job is not canceled in your computer, the data will be sent once again to the printer.
3-1 Canceling printing
1
2
3
3. Troubleshooting
Inch specification
Metric specification
Inch specification
Metric specification
Inch specification
Metric specification
To Next Page
Loading...
