Kyocera PA2001w - Page 119

7-3
Troubleshooting
Printouts have dropouts
or stray dots.
— Clean the drum unit. 6-11
Select the Configuration > Device
Defaults > Media type and set it to
Custom7. If there is still no
improvement, Decrease the
adjustment value for Print density in
KYOCERA Client Tool.
If there is still no improvement, return
the setting to the original value.
3-44
Printouts have vertical
streaks.
— The drum unit may be damaged. If the
problem is not solved even after
printing several pages, call for service.
—
Faint or blurred printing. Check the toner cartridge. If necessary, replace the toner
cartridge.
6-1
Check the Print density setting in
KYOCERA Client Tool.
Increase the adjustment value for the
Print density in the KYOCERA Client
Tool. For more information, refer to
KYOCERA Client Tool User Guide.
—
White streaks appears Check the toner cartridge. If necessary, replace the toner
cartridge.
6-1
Gray background. Check the toner cartridge. If necessary, replace the toner
cartridge.
6-1
Check the Print density setting in
KYOCERA Client Tool.
Decrease the adjustment value for the
Print density in the KYOCERA Client
Tool. For more information, refer to
KYOCERA Client Tool User Guide.
—
Dirt on the top edge or
back of the paper.
Is the interior of the printer dirty? If the problem is not solved even after
printing several pages, clean the
registration roller, conveying unit and
paper feed unit.
If the problem is not solved after
cleaning, call for service.
6-7
Symptom Checkpoints Corrective Actions
Reference
Page