Kyocera TASKalfa 180 - Page 234

2KL/2KK
2-3-8
YC27 1 5V O 5 V DC 5 V DC power output to CCDPWB
Connected
to the CCD
PWB
2 NC - - Not used
3 TG O 0/3.3 V DC CCD control signal
4 GND - - Ground
5 RS I 0/3.3 V DC CCD control signal
6 GND - - Ground
7 CP O 0/3.3 V DC CCD control signal
8 GND - - Ground
9 PHY2 - 0/3.3 V DC (pulse) CCD clock signal
10 GND - - Ground
11 GND - - Ground
12 Vout1 Analog CCD output signal
13 Vout2 Analog CCD output signal
14 GND - - Ground
15 NC - - Not used
16 CCDPWR O 12 V DC 12 V DC power output to CCDPWB
YC29 1 KEY4 I 0/3.3 V DC (pulse) Operation panel key scan return signal 4
Connected
to the opera-
tion PWB
2 KEY3 I 0/3.3 V DC (pulse) Operation panel key scan return signal 3
3 KEY2 I 0/3.3 V DC (pulse) Operation panel key scan return signal 2
4 KEY1 I 0/3.3 V DC (pulse) Operation panel key scan return signal 1
5 KEY0 I 0/3.3 V DC (pulse) Operation panel key scan return signal 0
6 LED12 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 12
7 LED11 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 11
8 LED10 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 10
9 LED9 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 9
10 LED8 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 8
11 LED7 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 7
12 LED6 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 6
13 LED5 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 5
14 LED4 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 4
15 LED3 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 3
16 LED2 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 2
17 LED1 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 1
18 LED0 O 0/3.3 V DC (pulse) Operation panel indicator LED drive signal 0
YC30 1 +5V O 5 V DC 5 V DC power output to OPWB
Connected
to the opera-
tion PWB
2 BUZERDRN O 0/3.3 V DC OPWB buzzer signal
3 SCAN7 O 0/3.3 V DC (pulse) Scan signal 7
4 SCAN6 O 0/3.3 V DC (pulse) Scan signal 6
5 SCAN5 O 0/3.3 V DC (pulse) Scan signal 5
6 SCAN4 O 0/3.3 V DC (pulse) Scan signal 4
7 SCAN3 O 0/3.3 V DC (pulse) Scan signal 3
8 SCAN2 O 0/3.3 V DC (pulse) Scan signal 2
9 SCAN1 O 0/3.3 V DC (pulse) Scan signal 1
10 SCAN0 O 0/3.3 V DC (pulse) Scan signal 0
Connector Pin No. Signal I/O Voltage Description