5-16
Operation on the Machine > Copying
Combine
Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines
around the pages.
The following types of the boundary lines are available.
Item Value Description
Off ― Disables the function.
2 in 1 ― Press the [OK] key to copy the original with the default setting. For the default
settings, refer to Function Default
on page 7-18.
2 in 1 Layout L to R T to B,
R to L
Press [Detail] to display the [2 in 1 Layout] screen.
Select the page layout of scanned originals, and press the [OK] key.
Border Line None, Solid Line,
Dotted Line,
Positioning Mark
Select the page boundary line, and press the [OK] key.
Original
Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [OK] key.
4 in 1 ― Press the [OK] key to copy the original with the default setting. For the default
settings, refer to Function Default
on page 7-18.
4 in 1 Layout Right then Down,
Down then Right,
Left then Down,
Down then Left
Press [Detail] to display the [4 in 1 Layout] screen.
Select the page layout of scanned originals, and press the [OK] key.
Border Line None, Solid Line,
Dotted Line,
Positioning Mark
Select the page boundary line, and press the [OK] key.
Original
Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [OK] key.
To Next Page
Loading...
