2R4/2R5/2R6
6-30
Contents
Supply power to each solenoid.
Purpose
Execute to check each solenoid's operation.
Method
1.Press the [Start] key.
2.Select the solenoid to operate.
3.Press the [Start] key.
* :Each operation starts.
* :The solenoid operation is available while the motor is operated.
4.To stop the operation, press the [Stop] key.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U033 Solenoid operation check
(Message: Chk Solenoid)
Items Contents
Branch Exit Operate the feed-shift solenoid.
MPT Operate the MP solenoid
Motor Operate the motor
To Next Page
Loading...
