2R4/2R5/2R6
6-31
Contents
Adjust the leading edge registration or center line.
Purpose
Executed if there is a regular error between the leading edges of the copy image and original.
Adjusted if there is a regular error between the center lines of the copy image and original.
Method
1.Press the [Start] key.
2.Select the item to adjust.
* :The screen for adjusting is displayed.
Adjustment: LSU Out Top
1.Select the item to adjust.
2.Press the [System Menu/Counter] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu/Counter] key.
*1: 500 x 1 cassette only
5.Press the [Ż] [Ź] keys or the numeric keys to change the counter value.
For the test pattern 1, increase the value.
For the test pattern 2, decrease the value.
U034 Paper timing adjustment
(Message: Adj Paper Timing)
Items Contents
LSU Out Top Full Adjust the leading edge registration (full speed)
LSU Out Top 3/4 Adjust the leading edge registration (3/4 speed)
LSU Out Top Half Adjust the leading edge registration (half speed)
LSU Out Left Adjusts the center line
Items Contents Setting range Initial
setting
Data
varia-
tion
MPT Adjust the leading edge timing for the MP
tray
-3.0 to 3.0 0 0.1mm
Cassette Adjusts the leading edge timing for cas-
sette feed
-3.0 to 3.0 0 0.1mm
PF
*1
Adjust the leading edge timing for the
paper feeder
-3.0 to 3.0 0 0.1mm
Dup Adjusting the leading edge timing when
duplex copying
-3.0 to 3.0 0 0.1mm
To Next Page
Loading...
