2R4/2R5/2R6
6-33
* :When the setting value is increased, the image moves to right, and it moves to left when the
setting value is decreased.
Figure 6-5
6.Press the [Start] key to set the setting value.
Precautions
Check the copy image after the adjustment. If the image is still incorrect, adjust the following in
the maintenance mode.
U034 < U067(P.6-241) < U072(P.6-246)
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Changes the printable area when copyng with Folio paper.
Purpose
Setting the actual size of Folio to use prevents the image dropout at the trailing edge or right/left
edges.
Method
1.Press the [Start] key.
2.Select the item to set.
3.Press the [Ż] [Ź] keys or the numeric keys to change the counter value.
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U035 Folio size setting
(Message: Set FOLIO Size)
Items Contents Setting range Initial
setting
Data
varia-
tion
Length Sets the Folio paper length. 318 to 356
(mm)
330 1(mm)
Width Sets the Folio paper width. 200 to 216
(mm)
210 1(mm)
AA A
Correct image
Output
example 1
Output
example 2
Center line
(within ± 2.0 mm)
To Next Page
Loading...
