9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "User Login" [Change]
2
Configure the settings.
1 Select [Local Authentication] or [Network Authentication].
Select [Off] to disable user login administration.
If you select [Network Authentication], enter the host name (64 characters or less) and
domain name (256 characters or less) for the Authentication Server. Select [NTLM],
[Kerberos] or [Ext.] as the server type.
When selecting [Ext.] as the server type, enter the port number.
2 Select [OK].
"Do you want to add a new function to the home screen?" appears when [OK] is selected.
To add a new function, select [Yes]. The selection screen for functions displayed in the
home screen will appear.
Item Descriptions
Local Authentication User authentication based on user properties on the local user list
stored in the machine.
Network
Authentication
User authentication based on Authentication Server. Use a user property
stored in Authentication Server to access the network authentication login
page.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Selecting "Domain" [Add/Edit] displays the domain registration list. In the domain
registration list screen, select [Add/Edit], and enter the domain name. Up to 10 domain
names can be registered.
Available Functions to Display on Desktop (page 2-16)
Model Name Login User Name Login Password
TASKalfa 4002i 4000 4000
TASKalfa 5002i 5000 5000
TASKalfa 6002i 6000 6000
To Next Page
Loading...
