Kyocera TASKalfa 4002i - Configuring Job Accounting; Default Setting

9-45
User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
Configuring Job Accounting
Default Setting
Select the default value for usage limit, and whether or not to enable counting by paper size.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "Job Accounting Settings" [Next] > "Job Accounting (Local)" [Next] > "Default Setting"
[Next] > "Default Counter Limit" [Next]
2
Configure the settings.
1 Select [Change] for the item you want to modify and then select [+], [-] or use the numeric
keys to enter the default restriction on the number of sheets.
2 Select [OK].
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Description
Counter Limit When you add a new account, you can change the default
restrictions on the number of sheets used. You can set any
number from 1 to 9,999,999.
The items that can be set differ depending on whether
[Individual] or [Total] is selected for [Copy/Printer Count].
Copy/Printer Count (page 9-52)
[Individual] selected for Copy/Printer Count
Copy Restriction
(Total)
Sets the default restriction on the number of sheets used for
copying.
Print Restriction
(Total)
Sets the default restriction on the number of sheets used for
printing.
Scan Restriction
(Others)
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
FAX TX Restriction
*1
Sets the default restriction on the number of sheets used for
sending faxes.
Model Name Login User Name Login Password
TASKalfa 4002i 4000 4000
TASKalfa 5002i 5000 5000
TASKalfa 6002i 6000 6000