9-52
User Authentication and Accounting (User Login, Job Accounting) > Copy/Printer Count
Copy/Printer Count
You can select how the copying and printing page counts are shown - either the total of both or each of copying and
printing individually. The selection may influence restriction on the count and count method. For details, refer to the
following:
Restricting the Use of the Machine (page 9-38)
Counting the Number of Pages Printed (page 9-47)
Print Accounting Report (page 9-49)
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting] > "Job Accounting
Settings" [Next]
2 Select "Copy/Printer Count" [Change].
2
Configure the settings.
Select [Total] or [Individual] > [OK]
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 4002i 4000 4000
TASKalfa 5002i 5000 5000
TASKalfa 6002i 6000 6000
To Next Page
Loading...
