9-23
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Configuring Guest Property
Register guest user information and functions that are restricted.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Guest Authorization Set." [Next] > "Guest Property" [Next]
2
Configure the settings.
Check the settings and change or add information as needed.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
User Name Enter the name displayed on the user list (up to 32 characters).
The default setting is "Guest User".
Access Level The authority of the user appears. This cannot be changed.
Account Name Add an account where the user belongs.
If the user does not belong to any account, select [Others].
Model Name Login User Name Login Password
TASKalfa 4002i 4000 4000
TASKalfa 5002i 5000 5000
TASKalfa 6002i 6000 6000
To Next Page
Loading...
