10-41
Troubleshooting > Troubleshooting
T
Staple jam. — If a staple jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed staple.
page 10-
102
System error. — System error has occurred.
Follow the instructions on the
screen.
—
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-68)
Message Checkpoints Corrective Actions
Reference
Page
Regulating the
temperature…
― The machine is under the
adjustment to maintain its
quality. Please wait.
―
The cover is open. Is there any cover which is
open?
Close the cover indicated on the
screen.
―
The device cannot be
connected because
allowed connections
would be exceeded.
― Cancel a connection to a
portable device that is not being
used, or set the machine's auto
disconnect time to break
portable device connections.
page 8-50
The folding unit is
open.
― Close the folding unit. ―
The password does
not meet password
policy.
Is the password expired? Change the login password.
The job is canceled. Select
[End].
page 9-7
page 9-8
Is the password policy
requirement (such as password
length or required characters)
changed?
Confirm the password policy
requirements and change the
login password.
The job is canceled. Select
[End].
page 9-7
page 9-8
The phone receiver is
off the hook.
― Put down the receiver. ―
The removable
memory is not
formatted.
Is the removable memory
formatted by this machine?
Perform [Format] on this
machine.
―
The slit glass requires
cleaning.
— Clean the slit glass using the
cleaning cloth supplied with the
document processor.
page 10-3
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
