Kyocera TASKalfa 4002i - Page 544

10-44
Troubleshooting > Troubleshooting
1103 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE
If the sender is a domain user, specify the
domain name.
•Path
• Folder share permissions of the recipient
page 5-24
Failed to send via FTP. Check the FTP settings.
•Path
• Folder share permissions of the recipient
page 5-27
1104 Failed to send the e-mail. Check the e-mail address.
NOTE
If the address is rejected by the domain, you
cannot send the email.
page 5-23
Failed to send i-FAX. Check the i-FAX address.
NOTE
If the address is rejected by the domain, you
cannot send the email.
Refer to
FAX
Operation
Guide
1105 Failed to send via SMB. Check the following settings.
[System Menu/Counter] key > [System/
Network] > [Network] > [TCP/IP Settings] >
[Protocol Detail] > [SMB Client
(Transmission)]
page 8-48
Failed to send the e-mail. Select [On] of the SMTP settings on the
Command Center RX.
page 2-65
Failed to send via FTP. Check the following settings.
[System Menu/Counter] key > [System/
Network] > [Network] > [TCP/IP Settings] >
[Protocol Detail] > [FTP Client
(Transmission)]
page 8-48
Failed to send i-FAX. Select [On] of the i-FAX settings on the
Command Center RX.
page 2-65
1106 Failed to send the e-mail.
Failed to send i-FAX.
Check the sender address of SMTP on the
Command Center RX.
page 2-65
1131 Failed to send via FTP. Enable the SSL.
[System Menu/Counter] key > [System/
Network] > [Network] > [Secure Protocol] >
[SSL]
page 8-58
Error
Code
Message Corrective Actions
Reference
Page