Copying Functions
4-50 OPERATION GUIDE
Priority Override
Suspends a current job and gives the selected job priority for copying. The suspended job resumes after Priority
Override copying is finished.
NOTE: The current job that is selected as Priority Override cannot be suspended.
The procedure for using Priority Override is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Advanced Setup] and then [Priority
Override].
4 Press [On] to select Priority Override.
5 Press [OK].
6 Press the Start key. The current copy job is
suspended and the copy job selected in Priority
Override starts. The suspended job resumes after
Priority Override copying is finished.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
