Kyocera TASKalfa 400ci - Appletalk Setup

Default Setting (System Menu)
8-94 OPERATION GUIDE
3 Press [On].
4 Press the key for the frame type you want to use.
5 Press [OK].
6 After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-12 about the procedures.
System - NetWare
Use NetWare to receive documents.
On
Off
Frame Type
Ether-IIAuto
802.3
SNAP
802.2
Cancel
OK
Status
10/10/2008 10:10
Downloaded From ManualsPrinter.com Manuals