Document Box
6-18 OPERATION GUIDE
Form for Form Overlay Box
Storing a Form
You can store forms to be used for the form overlay in the Form for Form Overlay box. You can store a 1-page
form.
Use the procedure below to store a form.
1 Press the Document Box key.
2 Place the original in the document processor or on
the platen.
3 Press [Job Box].
4 Select [Form for Form Overlay] and press [Open].
5 Press [Store File].
6 If necessary, select the image quality of original,
scanning density, etc. before the original is
scanned.
7 Press the Start key. The original is scanned and
stored in the Form for Form Overlay box.
NOTE: For information on using image overlays with a
stored form, see Form Overlay on page 4-33 and Form
Overlay from Custom Boxes on page 6-7.
To Next Page
Loading...
