Default Setting (System Menu)
OPERATION GUIDE 8-15
8
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1 Press the System Menu key.
2 Press [Common Settings] and then [Change] of
Measurement.
3 Select [mm] for metric or [inch] for inch.
4 Press [OK].
Error Handling
Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper size and media type.
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
Item Description
1-sided Printed in 1-sided
Display Error Error message to cancel printing is
displayed.
Processing Description
Ignore The setting is ignored and the job is
printed.
Display Error Error message to cancel printing is
displayed.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
