Default Setting (System Menu)
8-22 OPERATION GUIDE
Color Selection (Copy)
Select the default copying color mode setting. The available default settings are shown below.
Use the procedure below to select the default color mode setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults and then [Change] of mode Color
Selection(Copy).
3 Select the default color setting.
4 Press [OK].
Color Selection (Send/Store)
Select the default color mode for scanning documents. The available default settings are shown below.
Color mode Description
Auto Color Automatically recognize whether
documents are color or black and white.
Full Color Scan document in full color.
Black & White Scan document in black and white.
Color mode Description
Auto Color (Color/Gray) Automatically recognize whether the
document is color or black and white, and
scan color documents in Full Color and
black and white documents in Grayscale.
Auto Color (Color/
B&W)
Automatically recognize whether the
document is color or black and white, and
scan color documents in Full Color and
black and white documents in Black and
White.
Full Color Scan document in full color.
Grayscale Scan document in grayscale for smoother
and finer finish.
Black & White Scan document in black and white. File
size is smaller than Full Color or Grayscale.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
