Kyocera TASKalfa 400ci - Page 300

Default Setting (System Menu)
8-36 OPERATION GUIDE
Quick Setup Registration
Select the copying functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated
to typical functions but can be changed as necessary. Six items from the following options are available.
• Paper Selection
•Zoom
• Staple/Punch
•Density
•Duplex
• Combine
• Collate/Offset
• Original Image
• Original Size
• Original Orientation
• Color Selection
• Continuous Scan
NOTE: Refer to Quick Setup Screen on page 3-50 for the Quick Setup steps.
Use the procedure below to register the Quick Setup functions.
1 Press the System Menu key.
2 Press [Copy] and [Next] of Quick Setup
Registration.
3 Press [Change] of the function to be registered in
Quick Setup.
Status
10/10/2008 10:10
Close
Change
Copy - Quick Setup Registration
Paper Selection:
Change
Change
Change
Change
Change Change
Change
Zoom:
Change
1/2
Staple/Punch: Density:
Duplex: Combine:
Collate/Offset: Original Image:
Original Size:
Key 1 Key 2
Key 6 Key 3
Key 4 Key 5
Off Off
Off
Downloaded From ManualsPrinter.com Manuals