Default Setting (System Menu)
OPERATION GUIDE 8-53
8
Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings.
1 Press the System Menu key.
2 Press [Report], [Next] of Result Report Setting,
[Next] of Send Result Report and then [Change] of
E-mail/Folder.
3 Press [Off], [On], or [Error Only].
4 Press [OK].
Item Description
Off No result report printed.
On Result report automatically printed.
Transmitted images can also be attached
to the FAX result report.
Error Only Result report printed only when a
transmission ends in an error. If two or
more destinations are registered, the
reports are printed only for the destinations
with the errors. Transmitted images can
also be attached to the FAX result report.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
