Default Setting (System Menu)
OPERATION GUIDE 8-103
8
Limitations:
- Scanning speed will be limited to the speed of scanning 600 dpi image. (Printing speed will not
be limited.)
- FAX transmission will be limited to the memory transmission.
Note:
- The Printed Document Guard Kit should not fully prevents a leak of information. We do not
guarantee any loss incurred while using this feature or when malfunction occurred with this
feature.
- The guard pattern printed on the colored paper or paper that is decorated with special design
may not be detected.
- We do not guarantee the integrity of the detection. If the malfunction occurs, contact your service
representative.
Use the procedure below to specify the Document Guard setting.
1 Press the System Menu key.
2 Press [System] and then [Next] of Optional
Function.
NOTE: If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to login with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
3 Select [Document Guard] from the list and then
[License On].
4 Enter the license key and press [Official]. To use
the function as a trial, press [Trial] without entering
the license key.
NOTE: For details on how to enter the license key,
consult your dealer or service representative.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
