Management
11-4 OPERATION GUIDE
3 Press [Login Password].
Press [# keys] to enter the login data using the
numeric keys.
4 Enter the login password and press [OK].
NOTE: If Job Accounting is enabled, you can browse
the number of pages printed and the number of pages
scanned by pressing [Counter Check].
If Network Authentication is selected as the user
authentication method, either Local or Network can be
selected as the authentication destination.
5 Check the login user name and password are
correct, and press [Login].
Logout
To log out the machine, press the Logout key to return
to the login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
• When the Power key is pressed to enter the sleep
mode
• When auto sleep is activated
• When auto panel reset is activated
• When auto low power mode is activated
• When low power mode is activated by pressing the
Energy Saver key.
Adding a User
This adds a new user. You can add Up to 1,000 users (including the default login user name). The table below
explains the user information to be registered.
Item Description
User Name* Enter the name displayed on the user list (up to 32
characters).
Login User
Name*
Enter the login user name to login (up to 64
characters). The same login user name cannot be
registered.
Login
Password*
Enter the password to login (up to 64 characters).
Access Level* Select Administrator or User for user access
privileges.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
