Preparation before Use
2-18 OPERATION GUIDE
3 Holding the paper width adjusting tab, move the
paper width guides to fit the paper.
NOTE: Paper sizes are indicated on the cassettes.
To change between inch size and metric size (A, B
sizes), follow the steps below to adjust the size switch.
1. Holding the paper width adjusting tab, move the
paper width guide to a position other than that of the
paper.
2. Turn the size switch A 90°.
>
3. Move the size lever B up (C) or down (I).
C:metric size (centimeters) (A, B sizes)
I:inch size
4. Turn the size switch 90°to lock it.
>
4 Align the paper flush against the left side of the
cassette.
To Next Page
Loading...
