Why is Kyocera Printer Accessories frequently jamming?
Frequent jamming in the conveyor or inner tray of Kyocera Printer Accessories may be due to excessively curled paper. If output pages are curled, adjust curling referring to page 31.
What to do if Kyocera Printer Accessories eject copies unevenly?
If ejected copies from Kyocera Printer Accessories are not flat or stacked unevenly, turn the paper over in the cassette and reload it.
How to fix paper jam in Kyocera Printer Accessories?
To resolve a paper jam with Kyocera Printer Accessories: * Ensure the side guide in the cassette is adjusted to the paper size. * Turn the paper over in the cassette and reload it. * Open the mailbox cover and remove the jammed paper. * Open the right cover (D8) and remove the jammed paper.
What to do if Kyocera Printer Accessories show staple jam?
If the operation panel displays a staple jam, remove the jammed staples.
Why Kyocera TASKalfa 552ci All in One Printer has no print output after reception?
If there is no print output after reception on your Kyocera All in One Printer, check if memory forwarding is activated and verify the forwarding destination.
Why Kyocera TASKalfa 552ci All in One Printer cannot receive document?
If your Kyocera All in One Printer cannot receive a document, first check that the modular cord is correctly connected. If a communication error is displayed, address the cause of the error and ask the sender to retry. Additionally, check if RX (reception) restriction is activated and, if it is, cancel the RX restriction.
Why Kyocera All in One Printer cannot send document?
If your Kyocera All in One Printer cannot send a document, make sure the modular cord is correctly connected. If a send error is displayed, identify the cause of the error and try sending again. Also, verify whether TX (transmission) restriction is activated and, if so, cancel the TX restriction.
General| Brand | Kyocera |
|---|---|
| Model | TASKalfa 552ci |
| Category | All in One Printer |
| Language | English |
To Next Page
