Kyocera TASKalfa 6550ci - Page 235

Sending Functions
6-13
6
Use the procedure below to select the orientation when placing the originals on the platen for sending.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Org./Sending Data Format] and then
[Original Orientation].
4 Select original orientation from [Top Edge on Top]
and [Top Edge on Left].
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
Select the orientation of the
original document's top edge.
Top Edge
on Left
Original Orientation
Top Edge
on Top
Destination
Cancel OKAdd Shortcut
Status
100%
A4
A4
Preview
Original
Zoom
Send
:
:
:
10/10/2010 10:10