Default Setting (System Menu)
9-31
9
System Stamp
The following header, footer, and stamp settings can be selected in System Stamp Settings.
Basic
Select displayed stamp settings.
Text (Text Stamp)
Set a Text (Text Stamp). The text set here can be selected as a stamp template during sending.
Use the procedure below to set a Text (Text Stamp).
1 Press the System Menu key.
2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Basic > [Add/Edit] in Text (Text
Stamp).
3 Select the key in which the print text will be registered, press [Add/Edit], and enter a maximum of 32
characters for the text string.
4 Press [OK].
Font (Page #)
When page numbers are used, set the font sizes that can be set.
Use the procedure below to set a Font (Page #).
1 Press the System Menu key.
2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Basic > [Next] in Font (Page #).
3 Press [Change] in Size 1 - Size 3, and set the font size.
4 Press [OK].
Font (Bates Stamp)
When a bates stamp is used, set the font sizes that can be set.
Use the procedure below to set a Font (Bates Stamp).
1 Press the System Menu key.
2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Basic > [Next] in Font (Bates Stamp).
3 Press [Change] in Size 1 - Size 3, and set the font size.
4 Press [OK].
•Basic
• Printing Jobs
• Sending Jobs
• Storing Jobs
To Next Page
Loading...
