Troubleshooting
12-36
If the original is difficult to remove, turn the dial. The
original will scroll out to a position where it can be
removed easily.
If the original tears, remove every loose scrap from
inside the machine.
4 Close the document processor top cover.
5 Reload the originals on the document processor
tray.
Right tray
Follow the steps below to clear paper jams in the right tray.
1 If jammed paper is seen through the paper ejection
slot of the right tray, pull it toward your side to
remove it.
If the paper tears, remove every loose scrap from
inside the machine.
2
Pull up right cover 1 lever and open the right cover 1.
3 Press the lever and open the fuser cover.
To Next Page
Loading...
