Kyongbo Electronics GDR-D01 - 6.2.7.2 Test Contact Test

Digital UnderVoltage Relay (GDR-D01) User's Manual V1.10
33 / 47
Kyongbo Electronics Co., Ltd.
6.2.7.2 Test ▶ Contact Test
This menu is a category that can check the conditions of the connections by
changing the connection outputs as desired.
Select 2. Contact Test in Test, then the following screen appears.
－
〉
C
o
n
t
a
c
t
T
e
s
t
1
.
T
/
S
1
:
O
f
f
*
2
.
T
/
S
2
:
O
f
f
3
.
T
/
S
3
:
O
f
f
4
.
T
/
S
4
:
O
f
f
5
.
T
/
S
5
:
O
f
f
6
.
H
.
A
l
a
r
m
:
O
n
To test T/S1 ~ T/S5 connections, after selecting( ) the desired connection, press
Key to change to On, and press ENTER ( ) Key, then after the connection is
activated, it recovers to off state with the sound of "Click".
To test Healthy Alarm connection, select( ) H.Alarm connection, press Key
to change to Off, and press ENTER ( ) Key, then after the connection is activated,
it recovers to On state with the sound of "Click".
Press Key in Contact Test, then it will exit this menu and convert to the upper
menu.