USER’S MANUAL OF LK-320E
LABEL & MARK INDUSTRIES COMPANY
39
Cutter
Choose Cutter ,
Rang(+0.0):
then sent -100~100 can to adjust the position of cutter line.
Under the Label medium
Select [ Correct ] and the screen will display as follows:
Label Length
Press[↑] or [↓] to select Label Length , Header_Pos or Cutter and
press [Enter].
Length Adjustment
Choose Label Length ,make sure the label is loaded properly, and press
[Enter] to start printing;
When completing printing, the machine will display as follows:
Actual length
Then, you may inspect the printing effect of your tube printer.
For example:
If the measured total length of these four printings is 101.5mm, you just enter
“101.5” and then press [Enter].
With this function, it is possible to adjust the actually printed length to what you
have specified.
Printerhead position Adjustment
Choose Header_Pos and the screen will display as follows:
To Next Page
Loading...
