COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Initial Issue Page 306
Sep. 30/11
Disassembly
23–70–40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
(2) Remove the two screws (1−135) used to secure CSMU cable (1−120) connect-
or to the MP PWA (1−50) and remove CSMU cable connector and the seal pad
(1−140).
NOTE
: Ensure that the CSMU is support before proceeding.
(3) Remove the the six screws (1−125) and washers (1−130) used to secure the
CSMU (1−120) to the front chassis (1−100).
(4) Remove the CSMU (1−120) and carefully guide the CSMU cable thru the slot in
the front chassis (1−100).
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
