La Crosse Technology CA79103 User Manual

10 | Page
• Pressure: InHg / hPa
• Pressure number setting
• THANK YOU
Note:
Units in the settings menu reflect how sensors will show on the station and which units
are shown in Data Stream. This includes the Extra sensors. I.E. When Fahrenheit is selected-
Fahrenheit on station and in Data Stream.
Settings Menu
1. Hold the SET button for 2 seconds to enter setting mode. HELLO, will show for two seconds,
then automatically move to language.
ENGLISH
will show. Press the + or - button to change
to another language (Español, or Français). Press the SET button to select Beep ON/OFF.
2. BEEP ON will show. Press the + or – button to turn beep sound OFF. Press the SET button to
move to 12/24 hour time.
3.
12/24 FORMAT
will show. 12HR flashes. Press the + or - button to turn select 24 hour time
format.
4. Press SET to confirm and move to the hour.
HOUR
will show. The hour flashes. Press the +
or - button to choose the hour.
5. Press SET to confirm and move to the minutes.
MINUTES
will show. Minutes flash. Press the
+ or - button to choose the minutes.
6. Press SET to confirm and move to the year. The
YEAR
2020
will show. Year will flash. Press
the + or - button to change the year.
7. Press SET to confirm and move to the month. The
MONTH
will show. The Month will flash.
Press the + or - button to change the month.
8. Press SET to confirm and move to the date.
DATE
will show. Date will flash. Press the + or -
button to change the date.
9. Press SET to confirm and select Month/Date or Date/Month display. The
MONTH/DATE
will
show. Press the + or - button to select DATE/MONTH.
10. Press SET to confirm and move to the temperature unit.
TEMP °C
Celsius
will show. C will
flash. Press the + or - button if you prefer °F (FAHRENHEIT).
11. Press SET to confirm and move to pressure units.
PRESSURE
will show.
INHG
will flash.
Press the + or - button to select HPA.
12. Press SET to confirm and move to adjust pressure number.
PRESSURE
will show.
Pressure
number
will flash. Press the + or - button to adjust pressure number.
13. Press SET to confirm.
THANK YOU
shows for 2 seconds, then exit the setting menu.
Note:
After 10 seconds with no button press, station returns to normal time display.
OTHER WEATHER STATION FEATURES
BACKLIGHT: DOES THIS STATION HAVE A BACKLIGHT?
Yes, your station has a backlight with 5 levels of intensity.
• Press and release the LIGHT button to adjust the backlight intensity or to turn it off.
• Intensity levels: 0% (OFF) | 1.5% | 20% | 50% | 100%

La Crosse Technology CA79103 Specifications

General

Brand	La Crosse Technology
Model	CA79103
Category	Weather Station
Language	English