26
Troubleshooting
Problem:
No reception of WWVB time signal
Solution
:
1) Wait overnight for signal.
2) Be sure indoor weather station is at least 6 feet
from any electrical devices, such as televisions,
computers, or other radio-controlled clocks.
3) Remove batteries for five minutes, reinsert and
leave alone without pressing buttons overnight.
4) If there are still problems, contact La Crosse
Technology
Problem:
Hour is incorrect (minute and date are correct)
Solution:
Be sure correct time zone and daylight saving time
are selected.
Problem:
The LCD is faint
Solution:
1) Set the LCD contrast to a higher number
2) Replace batteries
Problem:
No remote temperature is displayed
Solution:
1) Remove all batteries, reinsert into remote
sensor(s) first, then indoor weather station.
2) Place remote sensor(s) closer to indoor weather
station.
3) Be sure all batteries are fresh.
Problem:
Remote humidity displays “- -“
Solution:
1) A temperature only sensor is being used and
displayed
2) The humidity is outside the range of 19-95%
NOTE: For problems not solved, please contact La Crosse Technology.
To Next Page
Loading...
Need help?
General
