INVENTORY OF CONTENTS
1. The indoor weather station (Figure 1).
2. One TX6U remote temperature sensor with mounting bracket
(Figure 2).
3. Three each, ½” Philips screws.
4. One strip double-sided adhesive tape.
5. Instruction manual and warranty card.
ADDITIONAL EQUIPMENT (not included)
Removable
stand
Figure 2
Mounting
Bracket
Battery
compartment
Battery
compartment
Hanging hole
Figure 1
Outdoor LCD
Indoor LCD
Forecast LCD
Sun/moon
LCD
Time LCD
1. Two, fresh AA 1.5V batteries for indoor weather station.
2. Two, fresh AA 1.5V batteries for remoter temperature sensor.
3. One, Philips screwdriver for mounting.
3
To Next Page