8
3. MINUS (-) button
• Decrease value in all setting modes
• Decrease the digits
• Stop the alarm during alarm ringing
4. SUN/MOON button
• Enter the sun/moon setting mode
• Start the sun/moon time calculation of the selected city
• Stop the alarm during alarm ringing
5. ALARM SET button
• Enter the alarm setting mode
• Stop the alarm during alarm ringing
6. ALARM ON/OFF button
• Activate/de-activate the alarm time
• Stop the alarm during alarm ringing
7. CHANNEL button
• Toggle between the outdoor transmitters 1, 2 and 3 (if more than
one transmitter is used)
• Pressed together with “MAX/MIN R” button for 3 sec allows
temperature channel reset
• Exit any set mode anytime during setting and to return to the
normal display mode
• Stop the alarm during alarm ringing
8. MAX/MIN R button (Max/min Reset)
• Press shortly to toggle between maximum, minimum and current
temperature value for selected outdoor temperature channel.
• Press and hold for 4 seconds to reset the maximum and minimum
records for selected temperature channel.
• Press to activate snooze function during alarm if snooze time is
valid in setting mode.
• Stop the alarm if snooze time is off in setting mode
• Pressed together with the “CHANNEL” button allows temperature
channel reset
To Next Page
Loading...
Need help?
General
