8
F. TIME SETTING
Note:
When the WWVB signal is found, that time will over-ride the manually set
time.
1. Hold down the “SET” button for 1 second (the selected time zone will
flash), press the “SET” button 3 more times, until the hour flashes in the
time LCD.
2. Press the “+” button to select the hour. Note:
when setting the hour, “PM”
will appear to the left of the hour display, if it is AM nothing will be
displayed.
3. Press the “SET” button to confirm the hour setting, and to shift to select the
minutes.
4. Press the “+” button to select the minutes.
5. Press the “SET” button to confirm the time setting, and to advance to
manually set the date.
G. DATE SETTING
Note:
When the WWVB signal is found, that date will over-ride the manually set
date.
1. Hold down the “SET” button for 1 second (the selected time zone will
flash), press the “SET” button 5 more times, until the year flashes in the
date LCD.
2. Press the “+” button to select the year.
3. Press the “SET” button to confirm the year, and to set the month.
4. The month will flash. Press the “+” button to select the appropriate month.
5. Press the “SET” button to confirm the month, and to set the date.
6. The date will flash. Press the “+” button to select the appropriate date.
7. Press the “SET” button to confirm the date, and to set the weekday.
8. The weekday will flash. Press the “+” button to select the appropriate
weekday.
9. Press the “SET” button to confirm the calendar settings, and to advance to
select either 12 or 24-hour time display.
H. 12/24-HOUR SETTING
Note: Setting to the 24 hour mode (also known as Military Time) will also
change the temperature to display in
°
C instead of
°
F.
1. Hold down the “SET” button for 1 second (the selected time zone will
flash), press the “SET” button 9 more times, until the “12” hour time
display flashes in the time LCD.
2. Press the “+” button to toggle between 12 and 24 hour time.
3. Press the “SET” button to confirm the 12/24-hour time display, and to
return to normal operation.
To Next Page
Loading...
