Need help?Do you have a question about the Lab.gruppen IPD SERIES and is the answer not in the manual?
General| Amplifier Class | Class D |
|---|---|
| Channels | 2 |
| Power Output (per channel) | 1200W @ 4Ω, 2400W @ 2Ω |
| Total Harmonic Distortion | <0.1% |
| Signal to Noise Ratio | > 100 dB |
| DSP | Available on DSP models (IPD 2400 DSP, IPD 1200 DSP, IPD 750 DSP) |
| Network Control | Ethernet, TCP/IP |
| Cooling | Temperature-controlled fan |
| Input Impedance | 20kΩ balanced |
| Connectors | XLR |
| Power Supply | Universal 100-240V, 50/60Hz |
| Protection | Short circuit, DC voltage, over temperature, current limit, mains overvoltage protection |
To Previous Page