Lab.gruppen IPD SERIES User Manual

7
IntelliDrive Controller software
and network configuration
Software and App Downloads and Installation
For download of the IntelliDrive Controller software for Mac and
PC, please visit www.ipdseries.com. Instructions for installation are
available via this link.
The IntelliDrive Controller app for iPad Is available from Apple in the
App Store.
Network configuration
A network of IPD ampliers may be congured using standard,
off-the-shelf Ethernet router and Cat-5 cabling. If the router is
WiFi enabled, the IPD amplier network will be accessible using an
iPad or laptop computer running IntelliDrive Controller software.
The IPD network employs a star topology only. Each amplier must be
connected individually to the router.
Wireless Router
Cat-5e
iPad / Tablet
iPad
PC or Mac Computer
Cat-5e
(direct connection may require
crossed cable or MDI/X capable NIC)
Network Router
Cat-5ePC / Mac
PC / Mac
Network conguration is automatic. Each amplier is identied by a
unique IP address, which is shown in the Global view and the device
header panel of IntelliDrive Controller.
For more detailed information on network conguration, please refer to
the IPD Series Operation Manual.
Input mixing/routing and DSP conguration using
IntelliDrive Controller
All input mixing /routing functions and DSP conguration parameters
are accessible and adjustable using IntelliDrive Controller software.
The six main window views are shown below. For more detailed
information on mixing/routing and DSP adjustment, please refer to the
IPD Series Operation Manual.

Lab.gruppen IPD SERIES Specifications

General

Amplifier Class	Class D
Channels	2
Power Output (per channel)	1200W @ 4Ω, 2400W @ 2Ω
Total Harmonic Distortion	<0.1%
Signal to Noise Ratio	> 100 dB
DSP	Available on DSP models (IPD 2400 DSP, IPD 1200 DSP, IPD 750 DSP)
Network Control	Ethernet, TCP/IP
Cooling	Temperature-controlled fan
Input Impedance	20kΩ balanced
Connectors	XLR
Power Supply	Universal 100-240V, 50/60Hz
Protection	Short circuit, DC voltage, over temperature, current limit, mains overvoltage protection