Lab.gruppen IPD SERIES User Manual

9
Input EQ
Input EQ view is selectable per channel. Input EQ accesses the
following functions:
• Parametric equalizer (up to 10 bands)
• High-pass lter
• Low-pass lter
• Output level and limiting status
• Input delay (up to 2 sec)
Output EQ
Output EQ view is selectable per channel. The Output EQ view
accesses the following functions:
• Parametric equalizer (up to 10 bands)
• High-pass lter
• Low-pass lter
• Output level and limiting status
• Output delay (up to 2 sec)
Crossover (X-Over)
The Crossover view accesses the following functions for each output:
• High pass lter
• High pass lter type
• High pass lter cutoff frequency
• Low pass lter
• Low pass lter type
• Low pass lter cutoff frequency
• Output level and limiter status

Lab.gruppen IPD SERIES Specifications

General

Amplifier Class	Class D
Channels	2
Power Output (per channel)	1200W @ 4Ω, 2400W @ 2Ω
Total Harmonic Distortion	<0.1%
Signal to Noise Ratio	> 100 dB
DSP	Available on DSP models (IPD 2400 DSP, IPD 1200 DSP, IPD 750 DSP)
Network Control	Ethernet, TCP/IP
Cooling	Temperature-controlled fan
Input Impedance	20kΩ balanced
Connectors	XLR
Power Supply	Universal 100-240V, 50/60Hz
Protection	Short circuit, DC voltage, over temperature, current limit, mains overvoltage protection