To Next PageTo Next Page
Need help?Do you have a question about the Labconco Protector Series and is the answer not in the manual?
Explains how to install, use, and maintain your Storage Cabinet.
Explains the conventions used in the manual for clarity and understanding.
Refers to Appendix A for complete Storage Cabinet dimensional specifications.
Instructions for carefully unpacking and inspecting the storage cabinet for transit damage.
Lists and describes the components for different models of Protector Storage Cabinets.
Details on moving the storage cabinet to its installation location and following installation steps.
Identifies key components of Protector Standard Base Storage Cabinets.
Instructions for installing and adjusting the leveling feet on all cabinet models.
Procedure for venting Acid and Standard Base Cabinets to the exterior or fume hood.
Procedure for venting Solvent Storage Cabinets, including plug removal and connection.
Instructions for attaching the filler panel to close off plumbing access.
Instructions for placing and aligning the epoxy work surface on top of the cabinet.
Procedure for grounding the solvent storage cabinet structure using the grounding screw.
Instructions for placing polyethylene liner trays in Acid Storage Cabinets.
Instructions for installing shelf brackets and shelves in Solvent Storage Cabinets.
Procedure for connecting power to the junction box for the vacuum pump.
Details the environmental conditions under which the equipment is designed to operate safely.
General guidelines for operating the storage cabinet safely and effectively.
Provides dimensional drawings and a table for Protector Standard Base Cabinets.
Provides dimensional drawings and a table for Protector Acid Storage Cabinets.
Provides dimensional drawings and a table for Protector Solvent Storage Cabinets.
Provides dimensional drawings and a table for Protector Vacuum Pump Cabinets.
Details accessory kits providing additional shelves and mounting hardware for Acid Cabinets.
Details accessory kits providing additional shelves and mounting hardware for Standard Base Cabinets.
Lists various work surface options available for the storage cabinets.
Details accessory kits for self-closing/automatic latching doors on Solvent Storage Cabinets.
Lists available filler panel kits for Protector XL Fume Hoods.
General
