14
Product Service 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Started
Protector Solvent Storage Cabinets
Models 9902000, 9902100, 9902200, 9902300,
9902400, 9903000, 9903100, 9903200, 9903300,
9903400, 9906000, 9906100, 9906200, 9906300
1. Factory Mutual Approval on Models; 9902000,
9902100, 9902300, 9903000, 9903100, 9903200
2. Double Wall Construction. Cabinet features 18
gauge epoxy coated steel exterior and interior liner
walls with a 1-1/2" air space located between them.
3. Locking Door Assembly. Cabinet features one or
two manual closing/self latching doors. NOTE:
Some models feature one or two self-
closing/automatic latching doors.
4. Shelf. 16 gauge steel shelf features fully welded
corners to hold spills and epoxy coated to provide a
chemical resistant surface. The shelf supports
inside the cabinet allows for height adjustment.
5. Vent Connection. Two vent connections are
located on the back wall of the cabinet and are
diametrically opposed. Each vent connection
includes a threaded coupling, two flame arrestors,
and closure plugs. Instructions for venting can be
found on page 23.
6. Leveling Feet Four individual leveling feet provide
adjustability to level the cabinet per the
requirements of your laboratory floor.
7. Optional Self-Closing Doors. Some models
include a self-closing door mechanism to close
doors automatically in case of fire.
8. Sequential Kit. Allows doors with self-
closing/automatic latching to be sequenced so the
left door closes before the right.
9927400 - 30" models
9927401 - 48" models only
S
To Next Page
Loading...
Need help?
General
