Labconco Protector Series User Manual

9
Product Service 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Started
Plus the Following:
Part # Component Description
9920301 Panel, Filler Standard (for 30” Interior Depth
Protector® XL Fume Hood)
or
9920304 Panel, Filler ADA (for 30” Interior Depth
Protector® XL Fume Hood)
9920400 Angle, Filler Panel (for 30” Interior Depth
Protector® XL Fume Hood)
or
9920401 Angle, Filler Panel ADA (for 30” Interior
Depth Protector® XL Fume Hood)
1928300 Leveling Feet (4)
Different filler panel depths are available; refer to
Appendix C: Storage Cabinet Accessories for filler
panel selection.
If you do not receive one or more of the components
listed for your Storage Cabinet, or if any of the
components are damaged, contact Labconco
Corporation immediately for further instructions.
Setting Up Your Storage
Cabinet
After you verify the Storage Cabinet components listed
on the following pages, move your Storage Cabinet to
the location where you want to install it. Then, follow
the steps for installation.

Labconco Protector Series Specifications

General

Brand	Labconco
Model	Protector Series
Category	Storage
Language	English