LM3605 Print & Apply Label Applicator
USER'S MANUAL
Page 52 Made in the U.S.A.
MAINTAINING THE AIR SLIDE
Very little maintenance is required to keep the Tamp Assembly’s air slide in good working condition. To
maintain the air slide, simply remove the air lines from the air slide and place 1-2 drops of any approved air motor
oil into the air inlets at least once a month. 1-2 drops of oil is also required for the incoming air supply.
WARNING!!! The main air supply must be shut off before you remove the air lines from the air slide.
4-03
To Next Page
Loading...