LaboGene CoolSafe - Running Release; Running De-Ice

Instruction manual for CoolSafe
01032016QA01
Item No. 701157
CopyRight © 2016
Page 19 of 25
3.3 Running release
Choose the “Release” command from the dropdown list and press “Send” to start the release
process.
3.4 Running de-ice
Select the “De-ice” command from the dropdown list and press “Send”. The De-ice configuration box
will appear.
Enter the required de-ice time in hours and minutes and press “Send”. De-icing will start and run for
the specified time.