Labounty MSD 3000 - Maintenance and Component Servicing; Scheduled Maintenance Inspection Checklists

MSD Legend Series Operation & Maintenance Manual | 21
MAINTENANCE
8-HOUR INSPECTION CHECKLIST
Inspect all safety devices
________ Safety decals are in place and legible (see “Decals” on page 6)
________ Cab protection and guarding is installed and in good condition.
________ Excavator warning systems are working.
Visually inspect for damage
________ Check for physical damage to the attachment, jaws, hoses , lines and ttings.
________ Check rotation connections for wear, leaks or failure (see “Hydraulic Inspection” on page 23).
Lubricate all points
________ Lubricate shear & turntable bearing, if equipped (see “Shear Lubrication” on page 23).
________ Lubricate the planetary gearbox, if equipped (see “Planetary Gearbox Lubrication” on page 24).
Inspect bolts and hydraulic fittings
________ Inspect and tighten all bolts and ttings (see “Inspect / Torque Bolts” on page 25).
Inspect connecting pins and retaining hardware for damage or wear. Replace if necessary.
________ Arm / Boom Connection.
________ Link / Arm connection.
________ Front and rear cylinder pins.
________ Main pivot group pin.
Inspect blades
________ Inspect blade gaps and shim if necessary (see “Measuring & Shimming Blade Gaps” on page 28).
________ Torque all blade bolts (see “Inspect / Torque Bolts” on page 25)
Inspected By: __________________________________________________ Date: _____________________