Need help?Do you have a question about the Lackmond BEAST5 and is the answer not in the manual?
General| Type | Tile Saw |
|---|---|
| Blade Diameter | 5 inches |
| Water Supply | Yes |
| Blade Type | Diamond Blade |
| Arbor Size | 5/8 inch |
| Application | Tile |
Details electrical input, motor capacity, and rated speed for optimal performance.
Specifies compatible blade sizes and maximum cutting depths at various angles.
Defines wheel thickness, peripheral gap, and rank angle for safe operation.
Guidelines for maintaining a safe working environment, including lighting and avoiding hazards.
Precautions related to electricity, plugs, cords, and wet conditions to prevent shock.
Measures to protect the operator, including alertness, PPE, and avoiding distractions.
Proper methods for using the tool, maintenance checks, and keeping cutting tools sharp.
Specific safety rules for abrasive cutting operations, including guards and wheel selection.
Guidance on tool service, cleaning ventilation, and avoiding water damage.
Instructions to avoid sudden tool reactions during cuts by maintaining grip and positioning.
Explains symbols used on the tool and in the manual for clarity.
Information on chemicals in the product and how to reduce exposure risks.
Identifies key components of the wet tile/stone saw with numbered references.
Steps for safely unpacking the tool and verifying all parts are present and undamaged.
Step-by-step guide for installing the blade fence, including orientation options.
Instructions for safely installing or changing the saw blade, noting left-handed threads.
Guide on connecting the water supply for blade cooling, including pressure limits.
Procedure for starting and stopping the saw, including water supply management.
How to lock the trigger switch for continuous operation and prevent fatigue.
Instructions for resetting the GFCI safety feature after power interruption.
Detailed steps for replacing the saw blade, emphasizing correct screw threading.
Steps to adjust the saw head for making precise bevel cuts from 0 to 45 degrees.
Guide on adjusting the blade height to control cutting depth for various materials.
Essential maintenance tasks, including cleaning and inspecting the cutting wheel.
Instructions for ensuring the blade is square to the surface using a small square.
Steps to diagnose and resolve problems like an overheating or non-running motor.
Details of the product warranty, coverage, and how to claim service.
Information on ordering identical replacement parts and obtaining support.
To Next Page
