EasyManuals Logo

laerdal SimPad Directions For Use

laerdal SimPad
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
22
23
English
LAERDAL
LAERD
AL
LAERDAL
SimPad
LAERDAL
LAERDAL
Battery 1
Battery 2
LAERDAL LI-ION BATTERY
It is possible to connect two Laerdal Li-Ion batteries to the
Link Box.
When the Link Box is powered on, the batteries are discharged
in parallel. The remaining capacity in each battery will be displayed
in the SimPad.
BATTERY CHARGING
The batteries can be charged through the Link Box when the Link Box power is turned off and
the Link Box is connected to the AC adapter.
During charging, the Link Box ON indicator will blink with a yellow light, and the LED indicators
on the batteries will show a steady yellow. When the batteries are fully charged, voltage to the
batteries will be turned off and the indicator on the Link Box will show steady yellow.
Alternatively, a battery can be charged by connecting it directly to the AC adapter.
During charging, the LED indicator on the battery will show a steady yellow. When the battery
is fully charged, the LED indicator shows steady green.
WARNINGS: Do not use the Laerdal Li-Ion Battery for other purposes than specied.
Use only the AC charger adapter supplied with the product.
Do not use the battery in temperatures above what is specied in this Directions for Use.
Do not heat or incinerate. Do not crush the battery. Do not short circuit the battery contact.
Do not immerse in water. The battery must be recycled and disposed of in accordance with
local rules.

Other manuals for laerdal SimPad

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the laerdal SimPad and is the answer not in the manual?

laerdal SimPad Specifications

General IconGeneral
Brandlaerdal
ModelSimPad
CategoryMedical Equipment
LanguageEnglish

Related product manuals